Skip to content

How To Use Descaling Solution Keurig

Keurig brewers use descaling solution to clean the inside of the brewer and remove any build-up that may occur. The descaling solution should be used every three months or every 200 brews, whichever comes first.

How To Use Descaling Solution Keurig

There are a few ways to use descaling solution with a Keurig. One way is to pour the solution into the water reservoir and brew as you would normally. Another way is to mix the descaling solution with hot water in a measuring cup, then pour it into the water reservoir. You can also brew a descaling solution coffee mug by filling the mug with hot water and adding two descaling solution packs. Stir until the packs dissolve, then brew as you would a regular

– descaling solution – keurig brewer

  • Fill the water tank with fresh water to the “max” line. add one desc
  • Rinse well and dry
  • Wash the removable part of your keurig brewer with warm, soapy water

-Clean your Keurig every month with a descaling solution to remove built-up mineral deposits. -Fill the water reservoir with cold water to the MAX line. Add 1/2 cup of descaling solution to the water reservoir. -Brew a descaling cycle by selecting the Strong Brew button and pressing it until it turns green. Allow the cycle to complete. -Rinse out the water reservoir and brew another cycle of fresh water to rinse out the machine.


Frequently Asked Questions

How Often Should I Use Descaling Solution In My Keurig?

Keurig recommends descaling your brewer every three to six months, or more often if you notice a decrease in coffee quality.

Do You Use The Whole Bottle Of Keurig Descaling Solution?

I typically do not use the whole bottle of Keurig descaling solution. I usually just use a small amount and then follow up with vinegar and hot water to rinse.

Do You Leave The Filter In When You Descale A Keurig?

Yes, the filter is left in when descaling a Keurig.


To Summarize

To descale a Keurig machine, put the descaling solution in the water reservoir and run a brew cycle with no K-Cups inserted. Repeat this process until the Descaling Indicator light goes off.

Leave a Reply

Your email address will not be published. Required fields are marked *