Skip to content

How To Turn Off The Descale Light On Keurig

The descale light on a Keurig brewer will come on when it is time to descale the machine. This light can be turned off by pressing the “Descale” button, which is located on the front of the brewer.

How To Turn Off The Descale Light On Keurig

A descale light on a Keurig coffee maker means that the machine needs to be descaled. Descaling is the process of removing mineral build-up from the coffee maker’s water reservoir and internal tubing. The descale light will turn off once the machine has been descaled. To descale a Keurig coffee maker, first make sure that it is unplugged and empty. Fill the reservoir with white vinegar and run a full brew cycle. Repeat this process

1. a keurig coffee maker 2. descale solution 3. paper clip or safety pin

  • Remove drip tray look for descale button press and hold the descale button for 5 seconds release the descale
  • Turn off keurig
  • Remove water reservoir
  • Unplug keurig

1. Make sure there is water in the reservoir 2. Lift up the handle and insert a K-Cup pod 3. Close the handle and press down on the top of the machine to brew 4. Once the cup is done, lift the handle and press down on the top of the machine to release the K-Cup pod 5. If you have a reusable filter, rinse it and place it in the holder 6. Fill the reservoir with fresh water


Frequently Asked Questions

How Do I Reset The Descale Button On My Keurig Coffee Maker?

The descale button on a Keurig coffee maker can be reset by pressing and holding it for five seconds.

How Do I Turn The Descale Off On My Keurig Supreme?

To turn the descale off on your Keurig supreme, you need to hold down the power button for 5 seconds.

How Do I Reset My Keurig 2.0 After Descaling?

To reset your Keurig 2.0 after descaling, unplug the brewer, wait 5 seconds, and then plug it back in. The machine will start automatically and go through a descaling process.


To Summarize

To turn off the descale light on Keurig, first make sure that you have descaled your brewer. If you have descaled your brewer and the light is still on, there may be something blocking the sensor. Remove any objects blocking the sensor and try descaling again. If the light is still on, please contact Customer Service for assistance.

Leave a Reply

Your email address will not be published. Required fields are marked *