If your Keurig® brewer needs a little refreshing, descaling is a great way to clean it. This will remove any built-up calcium deposits, or water scale, that can sometimes occur. Descaling should be done every 3 to 6 months, or more often if you live in an area with hard water. To descale your Keurig® brewer, simply mix equal parts water and distilled white vinegar, and then run the mixture through your machine like you would with water. Afterward, run two to three cycles of fresh water through the brewer to remove any leftover vinegar.
7 Steps to Reset Keurig After Descaling
Descaling your Keurig is an important part of keeping it functioning properly. Over time, calcium and other minerals can build up in your coffee maker and cause it to work less efficiently. Descaling removes these deposits and helps keep your Keurig running like new. To descale your Keurig, start by mixing equal parts water and white vinegar. Then, pour the mixture into the water reservoir and run a brew cycle without using any coffee pods. After the cycle is complete, run another cycle using only water to rinse out the vinegar. You should descale your Keurig every 3-6 months, or more often if you notice that it isn’t functioning as well as it used to.
It is important to learn how to reset your keurig after descaling it, because if you don’t, your machine may not work properly. Descaling is a process of removing built-up calcium and other minerals from your coffee maker, and it’s something that should be done every few months. If you don’t reset your machine after descaling it, the settings may not be correct and you may not be able to make coffee correctly.
Step 1: How To Reset A Keurig After Descaling
Unplug the Keurig coffee maker from the outlet. Remove the water reservoir and empty it. Pour out any water left in the internal tank. Fill the water reservoir with fresh water and reattach it to the machine. Add a new K-Cup pod to the chamber and close the lid. Press the power button to turn on the machine, then brew a cup of coffee.
Step 2: Unplug The Brewer From The Power Outlet
Unplugging the brewer from the power outlet is an important step in resetting your Keurig after descaling. This will ensure that the machine is completely off and will not start up again while you are resetting it.
Step 3: Remove The Water Reservoir
To remove the water reservoir, first locate the release button on the bottom of the unit. Press and hold this button while you lift the water reservoir straight up and out. If your model has a water filter, remove it now and discard it.
Step 4: Locate The Small Hole On The Back Of The Brewer And Use A Paper Clip Or A Sharp Object To Press And Hold The “Reset” Button For Five Seconds
Locate the small hole on the back of the brewer and use a paper clip or a sharp object to press and hold the “reset” button for five seconds.
Step 5: Replace The Water Reservoir
To replace the water reservoir, first remove the empty one by lifting it straight up. Next, take the new water reservoir and insert it into the Keurig. Make sure the handle is facing the front, then push down until it clicks into place.
Step 6: Plug The Brewer Back Into The Power Outlet
After you have descaled your Keurig, it is important to plug the brewer back into the power outlet. This will ensure that your Keurig is properly reset and will be able to resume normal operation.
Step 7: The Brewer Will Reset And Be Ready To Brew A Cup Of Coffee
To reset your Keurig after descaling, simply press the “Brew” button and hold it down for 3 seconds. This will reset the machine and it will be ready to brew another cup of coffee.
Frequently Asked Questions
Why Won’T My Keurig Descale Light Go Off After Descaling?
There could be a few reasons why the descale light won’t go off after you’ve descaled your Keurig. One reason could be that the descaling process didn’t fully remove all the built-up minerals, so the light is still indicating that the machine needs to be descaled again. Another possibility is that there’s a problem with theKeurig’s sensors or circuit board. If descaling the machine doesn’t fix the problem, you may need to contact Keurig customer service for further troubleshooting.
Why Is The Descaling Light Still Flashing After Descaling Keurig?
There could be a few reasons why the descaling light is still flashing after descaling your Keurig. The most common reason is that the machine didn’t go through the full descaling cycle. Make sure to follow the descaling instructions that came with your machine, and run the cycle until the machine prompts you that it’s complete. Another reason could be that there is still some build-up in the machine, and it will need to be descaled again.
In Summary
Resetting the Keurig after descaling is a necessary step to ensure that the machine is functioning properly. After descaling, Keurig recommends that users reset the brewer by unplugging it and then plugging it back in. This will clear any descaling chemicals that may still be in the brewer and allow it to function as normal.
