How To Reset Kenmore Washer

If you are experiencing problems with your Kenmore washer, resetting the machine may help to resolve the issue. To reset the Kenmore washer, unplug the machine from the wall outlet and wait for one minute. Plug the machine back in and press and hold the power button for five seconds. The washer will restart and should begin working properly.

How To Reset Kenmore Washer

If your Kenmore washer isn’t working correctly, you may need to reset it. To do this, you’ll need to unplug the washer and wait for at least 30 seconds before plugging it back in. Once it’s plugged back in, press and hold the start/pause button for three seconds. The washer will start up again and should be working correctly.

-1/2 inch socket wrench -Phillips head screwdriver -Tape measure -Paintbrush -All-purpose cleaner -Water -Bucket -Vacuum cleaner

  • Unplug the washer from the power outlet
  • Remove the water supply hoses from the back of the washer
  • Place a bucket or container underneath the drain hose to catch any water that may come out

1. Unplug the washer before beginning any repairs. 2. Check the washer’s manual for specific instructions on how to reset the machine. 3. Locate the washer’s reset switch, which is typically a small, red button located on the machine’s console. 4. Push and hold the reset switch for several seconds until the washer powers up and begins to cycle.


Frequently Asked Questions

How Do I Reset Kenmore?

To reset a Kenmore dryer, unplug the appliance and remove the screws that hold the back panel in place. Remove the panel and locate the small motor near the bottom of the machine. Locate the red reset button on the motor and press it with a pen or paper clip. Replace the back panel and plug in the dryer.

How Do I Reset My Kenmore Freezer?

To reset your Kenmore freezer, you will need to locate the circuit breaker that controls it and switch it off. Once it is off, you will then need to wait about five minutes before switching it back on.

Where Is The Reset Button On Kenmore Ice Maker?

The reset button is located on the front of the ice maker, typically near the bottom.


To Review

This video provides step-by-step instructions for how to reset a Kenmore washer.

Leave a Comment