Skip to content

How To Remove Instant Pot Anti Block Shield

Instant pot anti block shield is a device that is used to prevent food from blocking the steam valve. This device can be easily removed by following these simple steps: 1) Remove the lid of the instant pot. 2) Look for the anti block shield and remove it by gently pulling it out. 3) If needed, clean the shield with a soft brush or damp cloth. 4) Reattach the shield by inserting it back into its original position and pushing until it

How To Remove Instant Pot Anti Block Shield

The anti-block shield is a small, round, removable disk located at the bottom of the Instant Pot. It is used to prevent food from becoming lodged under the lid and causing a blockage. If food does become lodged, the shield can be removed and cleaned. To remove the anti-block shield, first unplug the Instant Pot. Next, locate the shield and use a flathead screwdriver to pry it off. Be careful not to damage the surrounding area.

-Instant Pot -Piece of cloth -Non-scratch scrubber -Water -White vinegar

  • Locate the anti block shield on the underside of the pot and lift it off
  • Wipe down the interior of the pot with a damp cloth to
  • Turn your instant pot off by pressing the “power” button

There are a few ways that you can remove the anti block shield on your Instant Pot. One way is to use a putty knife to wedge it between the shield and the pot and then pry it off. Another way is to use a butter knife to get underneath it and then lift it off. You can also use a wire hanger to do the same thing.


Frequently Asked Questions

How Do I Remove Anti Clog Cap?

The anti clog cap can be removed by turning it counterclockwise.

How Do You Clean A Ninja Food Seal Sealer Ring?

There are a few ways to clean the sealer ring on your ninja food sealer. One is to fill the sink with soapy water and then place the ring in the water. Use your fingers to rub the ring until it is clean. Another way to clean the ring is to use a toothbrush and some vinegar or lemon juice. Rub the toothbrush around the ring until it is clean.

How Do I Clean My Ninja Foodi Pressure Lid?

The Ninja Foodi pressure lid is dishwasher safe.


To Summarize

If the Instant Pot’s anti-block shield is clogging, try these methods to clear it: remove the shield and clean it with a toothbrush; try boiling water to clear the blockage. If the shield is still clogged after trying these methods, it may need to be replaced.

Leave a Reply

Your email address will not be published. Required fields are marked *