Skip to content

How To Properly Fill A Butane Torch

Butane torches are a popular way to heat things up. They are portable, efficient and easy to use. However, there are a few things you need to know in order to use them properly. Here is a guide on how to fill and use a butane torch.

How To Properly Fill A Butane Torch

To properly fill a butane torch, one must first make sure the torch is turned off. Next, remove the safety cap and unscrew the gas tank cap. Hold the torch upright and insert the gas tank into the opening at the bottom of the torch. Turn the gas tank clockwise until it is tight. Now, turn on the torch and hold it in an upright position. The blue flame should come on and stay lit. If the flame goes out, turn off the torch and

Butane torch, lighter fluid, lighter

  • Check the butane level in the torch by unscrewing the fuel tank
  • Using a screwdriver, remove the four screws that hold the tank in place
  • Pull out the tank and turn it over to see the fuel level

-Check the fuel level in the butane tank before use -Open the valve on the butane tank and press the ignition button to light the torch -Hold the torch with the nozzle pointing down and slowly turn the knob to increase the flame -To extinguish the flame, turn the knob to the “off” position


Frequently Asked Questions

Do You Shake Butane Before Filling Torch?

I’m not sure, but I would guess that you don’t shake butane before filling a torch. If you did, you might end up with an inconsistent flame.

Do You Have To Wait After Filling Butane Torch?

Yes, you should wait after filling the butane torch. The instructions that come with the butane torch will likely tell you to wait a certain number of minutes after filling it before using it. This allows the gas to flow evenly through the entire torch.

Should You Shake Butane Before Filling A Torch?

Shake the can of butane before filling the torch to help mix the fuel and air.


To Review

A butane torch is a handheld device that uses a flammable gas, such as butane, to produce a flame. It can be used for a variety of tasks, including soldering, plumbing, and cooking. To use a butane torch, you must first fill it with the appropriate fuel. Butane torches can be filled at most hardware stores or home improvement centers.

Leave a Reply

Your email address will not be published. Required fields are marked *